1. Product Overview
Our company produces a series of solid-state soft starting devices for medium and high voltage motors (hereinafter referred to as soft starting devices)
which are mainly suitable for squirrel-cage asynchronous and synchronous motors. Start and stop control and protection. It uses high-quality series-parallel thyristors to steplessly control the output voltage and enable the motor to start and stop smoothly. It has fault protection functions such as overload, phase loss, and operating overcurrent. It can effectively avoid harmful impacts on the power grid caused by excessive motor starting current, and can normally use high-power motors under limited power grid capacity and extend their service life. service life.
Series soft starting devices are suitable for soft starting of large and medium-sized AC motors with rated voltage
. The products are widely used in large-scale steel, petroleum, chemical industry, aluminum industry, fire protection, mining, sewage treatment, electric power and other industrial fields, and can be used well with electric motor driving equipment. Such as water pumps, fans, compressors, pulverizers, mixers, belt conveyors and other electromechanical equipment.
2. Model Description
Each soft-start device has been fully functional and operational tested before leaving the factory. After the user receives the device and unpacks it, please follow the following steps to check. If you find any problems, please contact the supplier immediately.
Check the nameplate to confirm that the product received is what was ordered.
Soft starter device nameplate description
@ @ @ @ @ @ @ @ @ @
Please check whether the product has been damaged during transportation, such as dents, deformation of the shell, internal connections, etc. Loose wires and connectors, etc.
Check whether it is equipped with a product certificate, warranty card, and "User Manual".
After the product leaves the factory, the product will be warranted according to the warranty card. After receiving the goods, please fill in the warranty card carefully and send the warranty card back to Xiangfan Xiangming Electric Technology Co., Ltd. or the supplier.
Ordering Instructions
Please provide the following information when ordering
Motor model, rated power, rated current, rated voltage, rated speed
Motor drag load Type
Main circuit scheme diagram
Equipment main circuit inlet and outlet mode
When the equipment is used in special environmental conditions, it should be mentioned when ordering
If the user has other requirements, please contact our company
3. Working principle
The thyristor high-voltage soft starting device is actually connected in series between the three-phase AC phase voltage and the three-phase AC asynchronous ( and synchronization) between the motor input terminals. By simultaneously adjusting the delayed conduction angles of three independent anti-parallel thyristor valve assemblies, the AC input voltage amplitude of the three-phase asynchronous motor (and synchronous motor) is changed, thereby changing the effective value of the three-phase input AC current. Achieve the purpose of constant current starting or starting or stopping according to a certain slope change curve. When starting is completed, the three-phase bypass contactor automatically closes and the motor is put into grid operation.
HSV high voltage solid state soft starter